A safe outdoor-unit support
Use a suitable pad, wall bracket, or other approved support for the equipment and site.
Compare mounting choicesMRCOOL®
We couldn't check pickup right now
The MRCOOL TravelCool is a 15,000 BTU rooftop inverter heat pump for RVs, travel trailers, fifth wheels, toy haulers, and mobile spaces. It cools and provides heat-pump heating from a 115V-class electrical supply, without asking you to find wall space for a residential mini split.
This listing is for the white TravelCool bundle, model MRDHP15WD-LCW. The current bundle imagery shows the white MRDHP15W-D rooftop unit with a ducted ceiling assembly. Because the supplied manufacturer documents do not decode the complete bundle SKU—and differ slightly on the required roof opening—confirm the exact ceiling assembly and roof fit with us before ordering.
A rooftop system keeps the main equipment outside and uses the roof location many RVs already reserve for air conditioning. TravelCool is built for campers, RVs, trailers, and trucks, and its low-profile rooftop unit is approximately 10.63 inches high.
The inverter-driven compressor can adjust its output instead of working only at one fixed level. That can support steadier comfort and more useful power planning, but it does not guarantee compatibility with a particular generator, inverter, battery bank, shore-power connection, or solar array.
The current Shopify listing identifies a complete white TravelCool system with the rooftop unit, ceiling assembly, MRDRC handheld remote, and MRDCW wired controller. The manufacturer installation manual confirms that the ducted and ductless packages include their matching ceiling hardware, remote, mounting bolts, and manual. The exact plenum and controller composition of bundle SKU MRDHP15WD-LCW still needs manufacturer or merchant confirmation, so we will not hide that detail behind a vague “complete system” label.
MRCOOL lists 15,000 BTU as the nominal cooling capacity. The installation manual gives a 10,000 to 15,000 BTU per hour operating range. The published cooling temperature range is 63°F to 109°F outdoors and 63°F to 90°F indoors.
The brochure also lists coverage of 172 square feet. Treat that as manufacturer guidance, not a universal sizing rule. RV insulation, windows, sun, air leakage, ceiling height, people, cooking, electronics, open doors, duct condition, and local weather can all change the real load.
Yes. TravelCool is a heat pump, so it can provide electric heating in suitable weather. The published heating range is 41°F to 75°F outdoors and 41°F to 81°F indoors. It is not a replacement for dependable cold-weather backup heat outside that range.
The supplied manufacturer documents do not agree on one heating-capacity number: the brochure lists 10,236 BTU while the installation manual lists a 12,000 to 16,000 BTU per hour range. We have left the heating capacity marked for confirmation instead of choosing the more favorable number.
TravelCool is sold here as a 115V system. The brochure uses 115V, while the installation manual also uses 110V and 120V in different places. Use the equipment nameplate and the latest manual when the circuit is designed.
The manual lists 1,000 to 1,650 watts in cooling, 1,000 to 1,400 watts in heating, and a 10.7 to 13.8 amp supply range. It calls for a dedicated grounded circuit, qualified electrical connection, suitable leakage and overcurrent protection, an all-pole disconnect, and a recommended 16 amp circuit breaker. Local requirements and the vehicle's electrical system still control the finished installation.
Possibly, when the complete power setup is sized correctly. Start with the documented operating-power range, then leave room for startup behavior, conversion losses, elevation or temperature limits, every other RV load, and a practical reserve. The manufacturer does not publish a universal startup-watt figure or generator size in the supplied documents.
For battery use, estimate the hours of heating or cooling you expect, the share of time the compressor may run, usable battery energy, inverter efficiency, charging, battery temperature, and the appliances that share the bank. Solar is a charging source, not a direct compatibility promise. Use our power planner to test more than one scenario.
Measure before you buy and confirm before you cut. The installation manual lists a 14.17 by 14.17 inch opening. The brochure lists 14.17 by 14.25 inches. That 0.08 inch difference is small, but it is still a conflict in the manufacturer documents.
Roof thickness also depends on the confirmed interior assembly. The ductless table covers approximately 0.98 to 2.67 inches. The ducted instructions give divider guidance for approximately 2.5 to 6 inches. A separate duct accessory may be needed for a thicker roof. The roof must support the static and travel loads, the mounting surface must stay within 10 degrees of level, and the location must avoid hidden wiring and structural damage.
The MDRDK ducted ceiling assembly connects to a compatible existing RV duct network. The MLRDK ductless assembly sends conditioned air directly into the living area through its ceiling plenum. They are not interchangeable labels: the roof thickness, air path, hardware, and installation steps differ.
This product's current image and bundle name indicate a ducted white configuration, while its old Shopify product type incorrectly called it ductless. We have corrected the product class and made the remaining bundle confirmation visible.
The MRDRC handheld remote controls operating mode, temperature, fan speed, sleep, turbo, eco, and timer functions. MRCOOL also documents the MRDCW wired controller and app setup. Confirm which controls are supplied with this exact bundle before relying on any optional control in your installation plan.
The manufacturer requires professional installation and qualified electrical connection. Read the installation manual before work begins and keep the unit's airflow, service access, weather protection, drainage, and combustible-material clearance in the plan.
TravelCool carries a two-year, non-transferable limited parts warranty for the original owner, subject to the full terms. The warranty does not cover labor, refrigerant, freight, transport damage, inadequate electrical service, or several other listed conditions. Read the linked warranty before installation.

Five checks before you buy
You do not need every answer memorized. You do need these five parts of the plan to agree.
A heating and cooling load calculation should show that the space needs about 15000 BTU. Square footage alone cannot make that call.
This is a 115V system. Have the circuit checked for this system.
The selected option covers ft. Measure the real path, including bends and service room.
Grid, battery, solar, and generator plans all need to support this model plus the other loads running at the same time.
Make room for airflow, drainage, weather protection, service access, and a safe outdoor-unit support.
Start with the three parts that make this a complete single-zone system. Open each item to see which parts come with the option you selected.
This is the part that mounts inside the space and delivers the conditioned air.
This is the outdoor half of the matched heat-pump system.
The selected package provides the documented total route length shown above. Measure the actual path before ordering.
Low-profile MRDHP15W-D rooftop unit with inverter-driven cooling and heat-pump operation.
The current bundle image shows the ducted interior assembly. Confirm model MDRDK and exact contents before ordering.
Controls mode, temperature, fan speed, timer, sleep, turbo and eco functions.
The current bundle listing says this wired controller is included. Confirm the exact bundle contents before planning its location and cable route.
The documented ducted package includes the mounting plate, adjustable baffle, mounting buckles, foil, four long bolts, twelve screws and the user manual.
What you may still need: outdoor support, line covers, electrical parts, drains, fasteners, and weatherproofing depend on your site and installation.
Professional rooftop RV installation with qualified electrical connection
A DIY connection does not make every site or every step suitable for a first-time installer.
Make sure the size, circuit, unit locations, line route, drainage, and local requirements all work together.
Match the indoor unit, outdoor unit, selected line-set option, and documented package contents.
Secure both units, create the wall path, protect the lines, and give condensate a reliable way out.
Follow the manual for your system and local electrical requirements.
Use the manual’s startup steps, look for drainage or connection problems, and keep the service path clear.
Can this be a weekend project? Sometimes—but the honest answer depends on the building, access, electrical work, weather, tools, and your experience. Work through these details before you schedule the job.
Voltage is only the starting point. Make sure the inverter, batteries, charging, generator, weather, other loads, and extra power kept available can all support the system over time.
Estimate power needsUse a suitable pad, wall bracket, or other approved support for the equipment and site.
Compare mounting choicesProtect exposed refrigerant lines, control wire, and drain where the installation calls for it.
See line-set coversMeasure first. Longer is not automatically better, and maximum length still applies.
See compatible extensionsUse the installation manual for this system and the electrical requirements for your location.
Review installation accessoriesThe MRCOOL TravelCool is a 15,000 BTU rooftop inverter heat pump for RVs, travel trailers, fifth wheels, toy haulers, and mobile spaces. It cools and provides heat-pump heating from a 115V-class electrical supply, without asking you to find wall space for a residential mini split.
This listing is for the white TravelCool bundle, model MRDHP15WD-LCW. The current bundle imagery shows the white MRDHP15W-D rooftop unit with a ducted ceiling assembly. Because the supplied manufacturer documents do not decode the complete bundle SKU—and differ slightly on the required roof opening—confirm the exact ceiling assembly and roof fit with us before ordering.
A rooftop system keeps the main equipment outside and uses the roof location many RVs already reserve for air conditioning. TravelCool is built for campers, RVs, trailers, and trucks, and its low-profile rooftop unit is approximately 10.63 inches high.
The inverter-driven compressor can adjust its output instead of working only at one fixed level. That can support steadier comfort and more useful power planning, but it does not guarantee compatibility with a particular generator, inverter, battery bank, shore-power connection, or solar array.
The current Shopify listing identifies a complete white TravelCool system with the rooftop unit, ceiling assembly, MRDRC handheld remote, and MRDCW wired controller. The manufacturer installation manual confirms that the ducted and ductless packages include their matching ceiling hardware, remote, mounting bolts, and manual. The exact plenum and controller composition of bundle SKU MRDHP15WD-LCW still needs manufacturer or merchant confirmation, so we will not hide that detail behind a vague “complete system” label.
MRCOOL lists 15,000 BTU as the nominal cooling capacity. The installation manual gives a 10,000 to 15,000 BTU per hour operating range. The published cooling temperature range is 63°F to 109°F outdoors and 63°F to 90°F indoors.
The brochure also lists coverage of 172 square feet. Treat that as manufacturer guidance, not a universal sizing rule. RV insulation, windows, sun, air leakage, ceiling height, people, cooking, electronics, open doors, duct condition, and local weather can all change the real load.
Yes. TravelCool is a heat pump, so it can provide electric heating in suitable weather. The published heating range is 41°F to 75°F outdoors and 41°F to 81°F indoors. It is not a replacement for dependable cold-weather backup heat outside that range.
The supplied manufacturer documents do not agree on one heating-capacity number: the brochure lists 10,236 BTU while the installation manual lists a 12,000 to 16,000 BTU per hour range. We have left the heating capacity marked for confirmation instead of choosing the more favorable number.
TravelCool is sold here as a 115V system. The brochure uses 115V, while the installation manual also uses 110V and 120V in different places. Use the equipment nameplate and the latest manual when the circuit is designed.
The manual lists 1,000 to 1,650 watts in cooling, 1,000 to 1,400 watts in heating, and a 10.7 to 13.8 amp supply range. It calls for a dedicated grounded circuit, qualified electrical connection, suitable leakage and overcurrent protection, an all-pole disconnect, and a recommended 16 amp circuit breaker. Local requirements and the vehicle's electrical system still control the finished installation.
Possibly, when the complete power setup is sized correctly. Start with the documented operating-power range, then leave room for startup behavior, conversion losses, elevation or temperature limits, every other RV load, and a practical reserve. The manufacturer does not publish a universal startup-watt figure or generator size in the supplied documents.
For battery use, estimate the hours of heating or cooling you expect, the share of time the compressor may run, usable battery energy, inverter efficiency, charging, battery temperature, and the appliances that share the bank. Solar is a charging source, not a direct compatibility promise. Use our power planner to test more than one scenario.
Measure before you buy and confirm before you cut. The installation manual lists a 14.17 by 14.17 inch opening. The brochure lists 14.17 by 14.25 inches. That 0.08 inch difference is small, but it is still a conflict in the manufacturer documents.
Roof thickness also depends on the confirmed interior assembly. The ductless table covers approximately 0.98 to 2.67 inches. The ducted instructions give divider guidance for approximately 2.5 to 6 inches. A separate duct accessory may be needed for a thicker roof. The roof must support the static and travel loads, the mounting surface must stay within 10 degrees of level, and the location must avoid hidden wiring and structural damage.
The MDRDK ducted ceiling assembly connects to a compatible existing RV duct network. The MLRDK ductless assembly sends conditioned air directly into the living area through its ceiling plenum. They are not interchangeable labels: the roof thickness, air path, hardware, and installation steps differ.
This product's current image and bundle name indicate a ducted white configuration, while its old Shopify product type incorrectly called it ductless. We have corrected the product class and made the remaining bundle confirmation visible.
The MRDRC handheld remote controls operating mode, temperature, fan speed, sleep, turbo, eco, and timer functions. MRCOOL also documents the MRDCW wired controller and app setup. Confirm which controls are supplied with this exact bundle before relying on any optional control in your installation plan.
The manufacturer requires professional installation and qualified electrical connection. Read the installation manual before work begins and keep the unit's airflow, service access, weather protection, drainage, and combustible-material clearance in the plan.
TravelCool carries a two-year, non-transferable limited parts warranty for the original owner, subject to the full terms. The warranty does not cover labor, refrigerant, freight, transport damage, inadequate electrical service, or several other listed conditions. Read the linked warranty before installation.
| System | |
|---|---|
| System type | Rooftop RV inverter heat pump |
| White rooftop-unit model | MRDHP15W-D |
| Sellable bundle SKU | MRDHP15WD-LCW |
| Performance | |
| Cooling capacity | 15,000 nominal; 10,000-15,000 operating range BTU/h |
| Heating capacity | Requires confirmation |
| Electrical | |
| Cooling input power | 1,000-1,650 W |
| Heating input power | 1,000-1,400 W |
| Documented current range | 10.7-13.8 A |
| Recommended circuit breaker | 16 A |
| Fit | |
| Roof opening | Requires confirmation |
| Supported roof thickness | Configuration dependent |
| Maximum installation inclination | ±10 degrees |
| Operating limits | |
| Cooling operating temperatures | Outdoor 63-109°F; indoor 63-90°F |
| Heating operating temperatures | Outdoor 41-75°F; indoor 41-81°F |
| Refrigeration | |
| Refrigerant / factory charge | R-32 / 25.4 oz |
| Performance | |
| Published sound levels | 55 Eco / 59 Turbo dB(A) |
| High-speed airflow | 323.72 cfm |
| Physical | |
| Rooftop-unit dimensions (L x W x H) | 40.95 x 29.72 x 10.63 in |
| Rooftop-unit net / shipping weight | 95.24 / 101.4 lb |
| Warranty | |
| Limited warranty | 2 years, parts only, non-transferable |